Aquarium Plant Pot - Peace Lily

A Planter to hang on the back of your aquarium and extend your aquascape beyond the tank. The plant photographed is a Peace Lily that grows well in an aquarium environment. When you purchase the plant from the store, wash off all the soil, split the plant into smaller clumps and pot it in a planter. Be sure to keep the roots in the water and green bits above.

• Designed for a 6mm [0.25"] glass or thinner.

Print Notes

This model is an easy print, using 92g of material. I would recommend PLA with 0.20mm Standard Setting. The trick to getting the best print is the orientation (shown in the pictures), but be sure to manually add tree support under the lip and at 6 points along the back surface.

• Nozzle: 0.4mm
• Layer Height: 0.20mm
• Infill: 15%
• Orientation: See Pictures
• Supports: Required under the lip and at 6 points on the back (see pictures)
• Brim: Not requried
• Top Shell Layers: 4
• Bottom Shell Layers: 4
• Wall Loops: 2

------------------------

If you’d like to support my work, you can buy me a coffee here ☕

You can also find more projects, tutorials, and workshop content over on YouTube.