Desktop Scotch Tape Dispenser
Print Profile(3)
Description
A stylish desktop tape dispenser for home or office use. This dispenser supports standard size Scotch tape roles with a core width of 1 inch (~26mm) and a tape width of 3/4 inch (~20 mm).
* Features a double sawtooth design that catches and cuts tape cleanly!
I printed with multiple filaments to create a rainbow spectrum to show off the ability to band colors due to the print orientation of the dispenser halves. Please be creative and share your results!
Notes:
- No supports required.
- All parts printed without using brims.
- Duplicate and mirror the dispenser half model to create each side.
- Easily assemble the two halves using four printed connectors.
- Drop in place the teeth.
- Insert the pin core and shaft through the center of the tape role and drop in place.
- No glue, screws, or additional parts required.
- I originally printed this model using Bambu PLA Matte filament which worked well. I later reprinted the teeth with a Bambu PLA Basic which resulted in them being a bit sharper and cutting the tape better.
- I printed all parts except the teeth with 15% infill at 0.16mm (Optimal in Bambu Studio slicer).
- The teeth I printed with 100% infill at 0.08mm (Extra Fine in Bambu Studio slicer).
- Shown as printed on a Bambu X1C.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (57)