Realistic LED bulb lamp

Do you have the led kit from bambu lab left? Try this ambient LED bulb lamp which looks realistic.

Printable at A1 mini, even no AMS is needed (use proper print profile where breaks are placed).

For the most top part of the bulb, you can use some transparent filament (at pictures, it is normal neutral PLA filament without color pigment) or you white (or some pastel color like) PLA filament.

For the socket, you can use some dark color filament, if you do not want to have the light coming through it. Or use some light color filament if you want have the light base as well. It is up to you. For better effect, decrees number of walls for the socket part.

Assemble is quite easy and straight forward. Put the LED to the most bottom part of the socket, place the top part and install the bulb. The model comes with size tolerances, so no force is needed. If you have to use any force during assembling the lamp, check your printer setup.

Important note: Printing the bulb can be difficult. Before printing, please make sure your bed is clean (use soap or some another cleaner) and level the bed.