Asetek Shifter Paddle replacement

These replace the standard asetek shifter paddles to a smaller size so you can fit them above or below the existing shifters. note the print is only the paddle, the shifter housing is not here. 

i designed these since i had a spare set of shifters from my forte formula wheel for which i got the CF paddle kit. I wanted to use these spares on my la prima buttonbox, but since the standard shifter paddles were too big, they would interfere when placed in the top position. These paddles are smaller to alleviate that problem, so i decided to share my work for other people to enjoy. They are a simple drop in replacement, just fully undo the adjustment screw, dont lose the silver nut that slide inside of the shifter cage and replace the paddle with the print. 

Mine were printed in BBL ABS on a texture plate for adhesion purposes, but i assume you could also print this on the CF pattern smooth plate for that cool look, They are still a bit flimsy at the very edge when applying more than normal force. i wanted a paddle that was light and quick to print. If you need more rigidity you could print in a stronger material like Nylon or GF or CF reinforced materials.