How it's done - KPop Demon Hunters Keychain - Free 3D Print Model

Search models, users, collections, and posts

StudBuffin

Generative 3D Model>Image to Keychain

IP Report

This model is created by Image to Keychain

Make Your Model

Print Profile(1)

All

A1 mini

H2D Pro

X1 Carbon

P1P

X1E

P1S

H2D

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

54 min

1 plate

5.0(7)

Open in Bambu Studio

Boost

248

100

Released

Description

How it's done - KPop Demon Hunters Keychain…noodle version 1

Yes, that's right - there are three noodle versions for you to collect, print and enjoy! That's just how it's done, done, done!

This version was tested on the A1 Mini using a 0.4 nozzle

Ele.goo PLA Plus Purple

Ele.goo rapid white and black

Ele.goo Yellow

Helpful Note:

Most of my prints are detailed and have fine lines - you may wish to download and print with a 0.2 nozzle however all are tested with a 0.4 nozzle. If you use certain filaments such as matte ones these are more prone to bleeding colour and you may wish to look at the purge settings. Above all: It is essential that you have a clean bed and use a small bit of adhesive, my go to is 3DLAC. This means that the finer details will stick to the bed without issue.

Boost Me (for free)

Boost me for free - this helps me to buy the filament to keep the designs coming! :) Thanks in advance!

Comment & Rating (8)

@Angelinahiccup

Print Profile

0.2mm layer, 2 walls, 15% infill

I printed a few of your designs and they all turned out great! I used the Bambu lab patterned plates and they look so good with the added sparkle! hard to photograph but just know they look fab!

The profile uploader has replied

@StudBuffin

Thank you 🥰

@user_2456797788

Print Profile

0.2mm layer, 2 walls, 15% infill

perfection!

@user_1522287417

Print Profile

0.2mm layer, 2 walls, 15% infill

@KrummyPrints

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print, thanks for sharing!

@jmemac

Print Profile

0.2mm layer, 2 walls, 15% infill

@rtisgood

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3780749314

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.