Print Profile(1)
Description
Spare parts for pool sand filter systems
Hose adapter for 32mm and 38mm pool hoses with G2 inch union nut
Threaded cap G2 inch - Blind cover
Thread adapter G2 inch to G1.5 inch
For clean sealing surfaces, use a smooth build plate
Printed in PETG
Do not use for high pressures
I strongly recommend PETG, ASA, or ABS
PLA is not suitable for permanent water contact and outdoor use (UV radiation/heat)
Important safety instructions (Please read!)
No high-pressure systems: This adapter is exclusively designed for pressureless applications or low-pressure systems (standard pool pumps for above-ground pools). It is not suitable for household water lines or high-pressure cleaners!
Regular inspection: Since 3D prints can degrade over time due to UV radiation and chlorine, a regular visual inspection of the components is mandatory. Look for cracks, discolorations, or leaks
Disclaimer: This is a private project. Use is at your own risk. I assume no warranty or liability for damages (especially water damage) resulting from use, component failure, or faulty printing
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)