Vortex Razor HD 1-6X24 Sniper Scope rifle sight - Free 3D Print Model

Search models, users, collections, and posts

补补觉去

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(1)

All

P1P

P1S

X1 Carbon

H2D Pro

H2D

X1E

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

8.3 h

2 plates

4.8(5)

Open in Bambu Studio

Boost

175

345

237

Released

Description

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.This is a cosplay prop.

Due to the new regulations, I cannot provide the complete model here. I will share the complete model on a cloud drive. After downloading the .3mf file here, you will receive the password, and you will have the complete toy.

Boost Me (for free)

Please do not open the downloaded .ZIP file directly with Windows Explorer, as it cannot be opened with a password. Please use unzip software such as 7-zip to open it.

Due to some comments in the comments section, I will no longer reply to any comments from now on!If you can understand the introduction, you will be able to obtain the complete model. If you cannot obtain the model, I will not provide any further explanation.

Thanks to AmserTheTree (@user_4080875950) for the photos and editing suggestions.Thanks to @user_332709444 for the photos.

A premium optical solution for short- to medium-range tactical applications. Optically, it delivers the highest levels of clarity, resolution, color accuracy, light transmission, and edge-to-edge sharpness. Constructed like a tank from 30mm aircraft-grade aluminum tubing, the Razor HD 1-6x24 features an ultra-low profile, cap-style windage and elevation turrets for smooth performance. The zero-resettable turret provides 50 MOA (20 MRAD) of adjustment with a single rotation, ensuring ample adjustment.

Boost Me (for free)

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.

Under the new reward mechanism, please "Boost Me" more, give me five-star praise, and welcome everyone to share and show off their finished works, so that I can get more points. Your support is my biggest motivation to continue designing more models.

Reminder:

Different filaments may cause the parts to be too loose or too tight, and may also make some supports difficult to remove.
The position of the model printing takes into account strength and appearance (for example: vertical surfaces have better fineness and better representation of patterns and text; horizontal printing axes sacrifice accuracy but have better strength).
Please keep the printing plate clean. All models are confirmed to be printable. It's not my fault if it turns into spaghetti.
It is recommended that you equip yourself with a heat gun. Slightly heating the parts can solve many minor problems and can also compensate for minor part tolerances.

Boost Me (for free)

Comment & Rating (21)

@user_3163777433

I made some minor modifications to the master's model I cut different sections added a pivot in the middle and did simple color separation allowing the white zoom ring to rotate The exterior was subtly adjusted this was altered according to my personal preference and is not strictly 'faithful to the real object' Because the master's license prohibits 'sharing and derivative works' I will not share the STL file please direct message me for details

Show original

@ruslanpgv

Can you share what rail mount do you use in your photo?

@user_332709444

Replying to @ruslanpgv :

I believe the:5-25 x 56 RIFLE SCOPE Like Venom

Show original

@user_3163777433

Replying to @ruslanpgv :

I found that the author has not released it on the international station of MakerWorld

Show original

@sezame_the_cat

Print Profile

0.2mm layer, 3 walls, 15% infill

Minor defect in scope geometry- unsupported part in eye pice couse bad bridging. Also screws are useless if printed in default position. But I like that model.

@REXERZZ

hello bro...do you have M14 MODEL？OR HK433(KILO 141)model？If you could send it to me，I could print it in two weeks and send photos to you（or could I exchange it with a M16A1 STL?The M16A1 is printable.）

The designer has replied

@bubujiaoqv

I'll give it a try. If the print size is enough, I'll make it.

@REXERZZ

Replying to @bubujiaoqv :

how can i send model to you？

@AmserTheTree

Replying to @REXERZZ :

If he can make it and he agrees to make it, he can make the M14 or HK433 model, then he will send the M14/HK433 model to you through the MakerWorld chat. If he wants to have your M16 model, you can send the STL file through the MakerWorld chat

@TheUnoReverse12

Looks cool, but can you PLEASE (I'm begging you) Add a reticle?

@user_332709444

Hello I have a reticle send me a direct message and I will send you the reticle (the file also contains reticles for Sig Bravo 4 and Aimpoint Acro)

Show original

@user_167389182

does it fit on a nerf gun?

@user_332709444

Nein

@ecstaticbrick

I know I've asked before but, could you please do the TTI Pit Viper and there are no good 3D models for it at all.

@user_1201982660

can you add a a1 mini print profile

@Henry1004

Print Profile

0.2mm layer, 3 walls, 15% infill

@paulvanderworp

Print Profile

0.2mm layer, 3 walls, 15% infill

@SteveBl

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.