Keyhole Slot Insert with Negative Modifier
Print Profile(1)
Description
This keyhole slot insert allows you to add a keyhole slot to any model you want to hang with a screw or nail.
It accommodates #8-#10 (1") or #10- #12 (1-1/4") screws.
Simply add the keyhole insert negative to your model as a negative part in your slicer. This will create the cavity in which you press in the keyhole insert. It is a nice snug fit. The insert and the negative are in 2 separate files. You have to download the STL/CAD files for the negative, so it can be imported independently.
___
Supports
None needed!
___
Scaling
I wouldn't recommend scaling these since they have a very nice press in tolerance.
___
Orientation
Everything prints upright with its flat side on the build plate
___
Print Settings
.2mm layer height
15% grid infill
2 walls
___
Hardware
Wall Anchors with Screws
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)