Cannondale SystemSix HollowGram 60 GoPro Mount
Print Profile(1)
Bill of Materials
- Zylinderschraube M5x20 (DIN912) x 1:
- Sechskantmutter M5 (DIN934) x 1:
Description
Boost Me (for free)
If you like the model, feel free to leave a Boost :)
Hello,
I have designed a GoPro adapter here for a Cannondale SystemSix HollowGram 60 seat post. This is movable and is mounted with an M5 screw.
To prevent the seat post from being scratched, the model was deliberately designed 1mm too large and a TPU spacer ring was included. The model thus consists of two parts:
Print Plate 1: GoPro Mount for the Seat Post
Printable in PLA, PETG, and ABS. The model consists of one part. After printing, the two clamps can be carefully pressed apart. Then the model is movable. Once a suitable GoPro counterpart is mounted, the correct distance is achieved and the mount clamps firmly.
Print Plate 2: TPU Spacer Ring 1mm
The TPU is elastic enough after printing so that it can be easily placed around the seat post. If you don't have TPU available, you can also print the spacer ring from any other material. However, then the seat post must be removed for mounting. With TPU, the seat post can remain mounted.
A mount for a Sigma Blaze taillight can also be seen in the photos. This mount is not part of the model. You can find it here: https://www.printables.com/model/131518-sigma-blaze-mount-gopro-mount
Of course, my model also fits all other GoPro adapters or a GoPro itself.
For mounting, an M5 screw with a corresponding nut is also required. I recommend M5 socket head cap screws.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)