Reptile Feeder Bug Run - Free 3D Print Model

Search models, users, collections, and posts

brandonl.4231

Household>Pets

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

4.4 h

1 plate

4.8(20)

A1 Mini Scaled Down 0.2mm layer, 2 walls, 15% infill

Designer

2.4 h

1 plate

4.0(1)

Open in Bambu Studio

Boost

161

379

675

345

Released

Description

I made this as a feeder for my panther chameleon. This allows bugs to crawl around a vertical space, while containing them somewhat. I had to experiment with colors a bit as my chamaleon would not eat off the blue one I made at first. Green/brown to simulate foilage seems to be the best.

INSTRUCTIONS

For mounting on the cage I used 3M removeable velcro tape. For screen cages you might have to get a bit creative, but you could screw into the model towards the top.

The rectangle model on the plate is the backboard to allow the bugs to climb. Superglue it or tape it to the inside of the model to give a rough surface for the insects to grab onto. I have it set to lightning infill for the cool organic pattern, but feel free to change to grid infill on the rectangle if it gives any issues.

Drainage holes are present, but need a bit of water pressure to actually drain. Feel free to drill holes out larger if your feeders will not slip through.

Comment & Rating (47)

@user_2778816073

Print Profile

0.2mm layer, 3 walls, 15% infill

Great design. Minor flaws, but probably because I printed in PLA and didn't adjust the slicer settings. Overall, I am really pleased!

(Edited)

The profile uploader has replied

@brandonl.4231

Thanks! Any chance you could post a picture of how it turned out? Would love to see the other prints, this was my first model that I made!

(Edited)

@user_2778816073

Replying to @brandonl.4231 :

I am working on printing it again using silk PLA with the hope that the smoother filament will help prevent the bugs from climbing. I used matte the first time around and the roaches climbed right up the front of the box and onto my counter LOL! I tried to sand down the layer lines on the inside front because the wall was a bit wonky and the layers started to separate. I'll get a pic of that and post it. Otherwise, it seemed pretty solid.

@brandonl.4231

Replying to @user_2778816073 :

I uploaded an STL version with thinner walls that might help the print time/material as well. For the bugs climbing the layers, I ended up just putting clear packing tape on the inside walls and they cannot climb that, works perfect.

@OSDane

Print Profile

0.2mm layer, 3 walls, 15% infill

good

@K14rkn

Got the back printed fine. but for some reason no matter what options I pick in cura the sides won’t Print? many ideas on how to fix ? thank you!

The designer has replied

@brandonl.4231

Could you download anyother slicer to try? Bambuslicer or Prusa slicer should work fine

@MagiMorphs

Printed beautifully!! Exactly what I needed, thanks!! Edited to add: I printed 3 with no issues using Bambu Labs in PETG and Bone White in PLA.

(Edited)

@rolltidega

Hey where is the rectangle model (the backboard piece)? When I download the raw files, I only see the feeder itself.

The designer has replied

@brandonl.4231

Hey, I just uploaded the backboard piece as a raw file in both STL and .3mf. For the backboard, feel free to resize it as necessary in your slicer. Just print it with no top shell layers, and lightning or any dense infill that the bugs can crawl on!