San Fransisco 49ers Coasters - Free 3D Print Model

Search models, users, collections, and posts

Leif H.

Household>Festivities

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 20% infill

Designer

3 h

2 plates

5.0(23)

0.2mm layer, 4 walls, 20% infill - Uploaded so OP can compare

3 h

2 plates

5.0(5)

Open in Bambu Studio

Boost

201

205

Released

Description

This is a simple drink coaster, in preparation for Super Bowl 2024! Go Niners!

Print with 4 colors, red / gold (or yellow) / black / white. There's an optional plane + foot variant, which is to print a base in e.g. TPU or TPE, for non-slip coasters. Glue these on to the base with holes. The little pegs are for alignments.

I’ve also added a caddy which should hold up to 8 100mm coasters.

Comment & Rating (43)

@timstu

Boosted

Print Profile

0.2mm layer, 4 walls, 20% infill

Really nice design. Had to adjust quite a few things in the print profile to make it print nicely on an X1C. edit: Printed a set as a house gift for the person holding the neighborhood Super Bowl party today, they’re a huge hit!!! Raised rating :)

(Edited)

The profile uploader has replied

@Zwoop

What did you have to change? I printed that profile on an X1C as well.

(Edited)

@timstu

Boosted

Replying to @Zwoop :

Nice to see you respond :) The bottom shell was coming out with 0 layers so it was showing the infill. I bumped it up to 4 layers and dropped the top shell to 3. The top shell was also printing super slow as if it were the first layer. It almost seemed like the top and bottom shell settings were reversed 🤷‍♂️ Maybe you flipped them on their pretty face after setting up your print profile and didn’t upload the one with your top and back trim shell changes? I also made a few other tweaks to make it print a bit faster where it seemed appropriate in my profile, but I don’t think those really really have much impact on the quality or strength of the coasters. The 3 coasters printed nicely in about 1.5 hours on standard speed and a little less than an hour on insane or whatever the fastest setting on the printer is called. The gold layer on the stand came out a bit funky on the edges, but I think that’s my fault and I just needed to calibrate max volumetric flow for that filament. Pic attached. I’ll upload my print profile for it after the game today, or tomorrow if the Super Bowl party goes on too late so you can see what I did. It’ll have my gcode edits in it to pull back filament 20mm before cutting when swapping filament for reducing the amount of material purged, so you’ll see the warning about custom gcode. If you’re worried about it, view the gcode changes in my print profile and you’ll see exactly what it does :)

(Edited)

@timstu

Boosted

Replying to @Zwoop :

Yeah, it seemed odd after seeing your pictures that the bottom shell/layer would have come out the way it did…

(Edited)

@jrboogiez

Boosted

Print Profile

0.2mm layer, 4 walls, 20% infill

Great design, made some for friends before the big game!

The profile uploader has replied

@Zwoop

Nice! Did you use the profile I uploaded? Seems some people have had problems with it but I’m not sure what it could be yet. Go niners!

(Edited)

@jrboogiez

Boosted

I did, and it worked great!

(Edited)

@user_650441061

Print Profile

0.2mm layer, 4 walls, 20% infill

Nice print 👌

@user_1564443404

Print Profile

0.2mm layer, 4 walls, 20% infill

amazing print

@IrrsinnHilft

Print Profile

0.2mm layer, 4 walls, 20% infill

Worked fine! In my special case I had to add some 3D-Milk to get first layer properly

@Linux215

Print Profile

0.2mm layer, 4 walls, 20% infill

Great design and printed perfectly .

@jerryprintUSA

Boosted

Print Profile

0.2mm layer, 4 walls, 20% infill

(Edited)

The profile uploader has replied

@Zwoop

thanks!

@timstu

Boosted

Came back to boost this model because I loved it so much when i printed it 7 months ago! :)

The designer has replied

@Zwoop

Thank you, really appreciate it! let’s hope for another solid season for our 9ers!

@timstu

Boosted

Replying to @Zwoop :

Oh, for sure!!!

@jkcloud1

Boosted

Print Profile

0.2mm layer, 4 walls, 20% infill

Love it. Perfect print.

The profile uploader has replied

@Zwoop

thanks for the boost!

@SHiNYQUEST

Where do I find this option. “There's an optional plane + foot variant, which is to print a base in e.g. TPU or TPE, for non-slip coasters. Glue these on to the base with holes. The little pegs are for alignments.” only coasters and holder are present

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.