Suspended Iris - Fiber Optic Lamp

All the fun of a suspended object, with the clear suspended filament being a fiber optic, lighting up itself and the center ring!

To print, the “Fiber” and “Rings” objects should both use the same material. However, two separate filament entries should be used in your slicer, like this:

When printing, if using an AMS, select the same filament for both:

This ensures the slicer properly handles the fiber strands. if this step is skipped, the strands may not properly attach at the center: 

Once printed, insert an LED light strip through the hole in the bottom, and loop it around the outside of the ring once or twice, facing the center. Tape or glue the lose end of the light strip so it doesn't come off.