Anti RFID case Generator

Make your own box to store car keys and protect yourself from thieves

With this box, made of two pieces with aluminum between them, you will block the RFID signals of your remote controls, protecting yourself from improper eavesdropping with scanners

Simply print the box once you have selected the measurements. You must bear in mind that the measurements you provide are the internal ones, since that is where the remote will go

There is an outer part and an inner part marked with a "1" and others with a "2"

You must take a sheet of aluminum foil large enough to cover the entire outer surface of the inner part. Cutting the corners diagonally helps it fit perfectly

Then turn over the inner part "1", apply contact adhesive and place it on top, pressing the sides and folding the corners until it is as smooth as possible

Now put more contact adhesive on the aluminum foil and slide it over the outer part marked with "1"

With a utility knife, trim the excess

Repeat the same process for the parts marked as "2"

And there you have it

Once the key is enclosed in the box, they will not be able to copy our key