Alternative case for N-Go by Manuferhi

This is an alternative case to the original N-Go, a magnificent Zx Spectrum Next clone manufactured by Manuferhi (www.manuferhi.com). It requires both the board and the original N-Go keyboard This case is based on Armand's model (es.youtube.com/c/ElViejovenFX), available at this link: https://www.thingiverse.com/thing:4921328 If you have a printer with a 35 cm bed, another user, @Hans007, has made a one-piece version of Armand's model for large beds: https://www.thingiverse.com/thing:5163245 My model is designed for printing on a P1S (25 cm bed) with minimal filament waste The thin top pieces should be glued with PLA glue. I recommend assembling the complete computer first to position them so they do not obstruct key presses The top frame is printed in 4 pieces that fit together like a rack. No gluing or adhesion is required The two retractable legs are not glued; they fit into the base to be opened and closed manually You can print it and enjoy it as much as I enjoyed designing it, but it is not permitted to sell or trade it. The photos include an exploded view of the parts that explains where each element goes. Thank you very much for downloading it