Ryoma Nagare Bookmark – Getter Robo

A 3D printable bookmark featuring Ryoma Nagare, the hot-blooded pilot from the Getter Robo saga. Available in two versions – 50x146 mm (short) and 50x170 mm (long) – it combines functionality with fan art collectability. Designed with sharp lines and vivid colors, it’s optimized for multicolor 3D printing, delivering a bold and faithful result without complex post-processing.

Created to be both functional and collectible, it works not only as a practical bookmark but also as a small tribute for fans of the series. The design is optimized for multicolor 3D printing, allowing for a faithful and striking result without the need for complex post-processing.

A unique accessory for anime lovers and an original gift idea for readers.

Printing Instruction

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Make sure you do NOT scale the Z axis if you resize the model or the print colours will be in wrong position

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #808080 PLA Esun Light Grey  Transmission Distance: 0.5
    #856fdc PLA Sunlu Purple  Transmission Distance: 6
    #724e3d PLA PolyTerra Army Brown  Transmission Distance: 0.3
    #8d091e PLA eSun Fire Engine Red  Transmission Distance: 1.1
    #cca897 PLA PolyTerra Peanut  Transmission Distance: 2.4
    #e6dddb PLA PolyTerra Cotton White  Transmission Distance: 2.5
 

This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #3 (0.32mm) swap to Light Grey
    At layer #7 (0.64mm) swap to Purple
    At layer #9 (0.8mm) swap to Army Brown
    At layer #14 (1.2mm) swap to Fire Engine Red
    At layer #16 (1.36mm) swap to Peanut
    At layer #21 (1.76mm) swap to Cotton White for the rest.
 

If you like this model, can i ask you to ❤ Like, ★ Rate and 🚀 Boost? Thank You!