Modern Diamond Clock

If you wish to offer me a small coffee

For commercial licenses, you can go to my Patreon

Read the descriptions before printing a model, important information is found there!

✅ Printed in PLA 

✅ Freely color this pretty little contemporary clock to match your interior
✅ Compatible with all clock mechanisms having an 8mm shaft diameter, no hook needed

✅ Print face up on the build plate to achieve a nice finish depending on your PEI

✅ Dimensions on the build plate: 230 x 230 x 30mm when mounted on the wall: 292 x 292 x 30mm

✅ You can find the clock hands here https://makerworld.com/en/models/2009767-various-clock-hands-70-100-mm#profileId-2164852

✅ Other clocks will be available on my profile later =)

✅ The clocks I publish are not compatible with the A1 Mini but… you can resize them to x=170 y=170 z=3mm to make them compatible with the A1 Mini

      Beware of the negative cylinder! It must remain centered and have a diameter of 8mm, do not change its diameter!

✅ You will find here a stand to place the clocks I publish on a desk, furniture, or shelf… if you don’t want to hang them on the wall

✅ You will find here a stand compatible with clocks resized to x=170 y=170 z=3mm

✅ You will find here the hands

✅ You will find here hooks for clock mechanisms