Hajime No Ippo Hueforge - Ippo Dempsey Roll
Print Profile(1)
Description
Membership
Avec le membership, tu peux vendre toutes mes impressions en toute liberté ! Un vrai coup de pouce pour mon travail ❤️ Merci ! With a membership, you're free to sell all my prints! It really supports my work ❤️ Thank you!
Boost Me (for free)
Un petit clic sur “Boost” et tu m’aides énormément — sans rien dépenser ! Merci pour le soutien ❤️
A simple click on “Boost”, helps me a lot — and it costs you nothing! Thanks for the support ❤️
N’oubliez pas de télécharger l’outil de fixation murale ci-dessous :
Don’t forget to download the wall mounting fixture below:
Soyez vigilant si vous utilisez un PLA différent de celui indiqué, les niveaux de distance de transmission peuvent varier et ainsi affecter le résultat.
Attention if you use a different PLA than indicated, the transmission distance levels may differ and thus impact the result.
Project: Ippo.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240x207.68mm in size
You may print at higher layer heights below the Base Thickness of 1.28mm
The Max allowed Thickness is 3.28mm and the Actual Thickness is 3.28mm
Filaments Used:
PLA Bambu Lab Basic Black Transmission Distance: 0.6
PLA Bambu Lab Basic Jade White Transmission Distance: 5
PLA Bambu Lab Basic Cyan Transmission Distance: 1.7
PLA Bambu Lab Basic Red Transmission Distance: 4
PLA Bambu Lab Basic Yellow Transmission Distance: 4.5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #18 (1.52mm) swap to Jade White
At layer #19 (1.6mm) swap to Cyan
At layer #20 (1.68mm) swap to Jade White
At layer #25 (2.08mm) swap to Red
At layer #32 (2.64mm) swap to Yellow
At layer #33 (2.72mm) swap to Jade White for the rest.
Comment imprimer plus de 4 couleurs avec un seul AMS: à partir de 42sec sur la vidéo
How to print more than 4 colours with a single AMS: from 42 sec onwards in the video
License
Comment & Rating (0)