3D printed kit for T-shirts, for A1/P1/X1, only needs magnet assistance.

It only requires you to prepare magnets, no additional parts processing, allowing you to create happily.

To achieve this, the structural tests were iterated many times, finally completing the final version.

This is a 3D printable kit for T-shirts,

After printing it, you can unleash your endless imagination,

Simple operations allow for easy printing on T-shirts.

The kit has undergone multiple structural optimizations and is divided into plates with mortise and tenon joints,

After complete assembly, the size is 256*256, equal to the build plate size of A1/P1.

This allows for a larger printing area on T-shirts, with a maximum printing area of 235*235 for P1 and 245*245 for A1.

Below is a brief introduction to the model structure and key usage points:

Strong magnets 40*10*5 ten pieces, 20*10*5 three pieces, several dovetail clips.

Important note: Ensure the T-shirt printing surface is flat. The printer needs to pass leveling before printing; do not skip leveling and print directly, as this may damage your printer.

No commercial use without permission! No secondary creation without permission!