Genji Dragonblade Ryuuichimonji
Print Profile(0)
Description
- The subdivision of the STL files is mainly based on my print size
Due to the proportion issue with the original sword, and my original plan to cut the blade part with an acrylic sheet, the thickness of the blade decoration on the back of the blade is small. If the slicing orientation is incorrect, the finished piece is very likely to crack during play. Therefore, it is recommended to use the same slicing orientation as mine (I have failed many times)
- Since the blade part was originally planned to be cut from acrylic and sharpened manually, the model does not include the sharpened edge. Please modify it yourself
- My model design has reserved space for LED light strips, switches, batteries, boost modules, and charging modules
My purchase links are as follows (no ads):
Boat switch (the soul of the Dragonblade! The opening in the handle is also sized for this switch; if you change it, remember to modify the model):
https://item.taobao.com/item.htm?spm=a1z09.2.0.0.6db82e8dQakCSY&id=554321760121&_u=r2fpdjj7d097
COB light strip (I personally think the light density is better than LED light strips, but the price is higher)
https://item.taobao.com/item.htm?spm=a1z09.2.0.0.6db82e8dQakCSY&id=656444201278&_u=r2fpdjj75cc1
Battery (18650 3000mAh battery, roughly estimated to last 30 hours on a full charge):
https://item.taobao.com/item.htm?spm=a1z09.2.0.0.6db82e8dQakCSY&id=585841360484&_u=r2fpdjj70711
Boost module, charging module (since COB light strips are generally 12V powered, a boost module is added):
https://detail.tmall.com/item.htm?id=41345485036&spm=a1z09.2.0.0.6db82e8dQakCSY&_u=r2fpdjj79f80
https://detail.tmall.com/item.htm?id=41345069371&spm=a1z09.2.0.0.6db82e8dQakCSY&_u=r2fpdjj78cdb
- I use brush painting for coloring; you can check OW for the sword's color scheme
- I use Chiefland BT series brush paints (make sure it's the BT series!!!!)
- Besides a gas mask, sanding is the most important part of painting; as long as you sand well, the painting effect will not be bad. Conversely, if you don't sand well, the painting effect will be very poor
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)