Metric 1~18mm, 0.1 step, Drill bit storage Stand

This is a drill bit holder and storage rack frequently used for DIY projects at home or in the office

It can hold drill bits from 1mm to 18.2mm (in 0.1 increments)

You can place 2 to 5 of the same drill bits in the slots

The holes at the back are sized from the exact measurements marked on the front

For 1mm to 5mm, they increase by 0.1mm (e.g., 1.0, 1.1, 1.2, 1.3, 1.4)

For 5.5mm to 6.5mm, they increase by 0.2, 0.3, 0.4 (e.g., 5.0, 5.2, 5.3, 5.4)

For 7mm to 11.5mm, they increase by +0.2 and +0.3 (e.g., 7.0, 7.2, 7.3)

For 12mm to 18mm, they increase by +0.2 (e.g., 12.0, 12.2)

Hole depths range from 15mm to 50mm

Printed with esun PLA+, and adjusted for expansion after checking all tolerances

The upper dimension text is embossed in 0.5mm increments

After printing with a light-colored filament, you can color it with a marker pen (oil-based marker)

To distinguish from cobalt bits, you can choose to color the front HSS engraved text with a marker pen (oil-based marker)

For material, you can print with PLA or similar, chosen to suit your usage environment