Wine Bottle Cryptex - Free 3D Print Model

Search models, users, collections, and posts

Chickenbisket

Toys & Games>Puzzles

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% gyroid infill

Designer

30.9 h

11 plates

4.6(39)

Open in Bambu Studio

Boost

488

1238

1 k

485

Released

Description

A large cryptex-style container for gifting wine/liquor/similarly shaped items. The combination is adjustable by changing the position of the notched inner number ring (keyed sleeve.stl) to align the notch with the desired code number (number sleeve.stl). The box is fully 3d printed. You will need to make 1 each of the inner cylinder/outer cylinder/lock nut, and 8 each of the keyed sleeves/number sleeves. To assemble you insert the keyed sleeve into the number sleeve and stack all the assembled sleeves onto the outer cylinder. The lock nut is then screwed on to retain all the rings. With the combination entered you can slide the inner cylinder into place and rotate the numbers to lock.

To print the full box on a Bambu printer requires going into the machine settings in Bambu Studio and modifying some settings. I've also uploaded a slightly shortened box that will fit in the default printer settings. This brings the internal length down from 13in to 12.5 in which should be plenty for a wine bottle and most single malts.

Here is a link to the wiki on how to enable the full print volume.
https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations

Comment & Rating (66)

@user_4166631237

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

This was a great print. I resized it down smaller as I didn't need it that big. Printed the main part in Bambu basic PLA, the rings in Bambu Silk PLA and the locking ring in Bambu basic PLA.

@Huguim

Boosted

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

Perfect!!👌👌👌 thanks!🍷

@ajpool09

Thanks turned out well!

@jossevel10

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

the model is cool but sliced profile is crap - random z seam looks horrible und the inner rings are placed the wrong way round on the build plate so it has to print in the air und turns out badly

The profile uploader has replied

@Chickenbisket

Not sure how that happened, I went back and flipped all the rings. It's certainly designed to print without support.

@jossevel10

thanks for that 😃- also may i ask you how you solved the issue when turning on the nut and algining the slot that the slot gets squized together so the slot is to small to enter the top part? i am currently reprinting the nut at 100.15% to if it is any better…

@Chickenbisket

Replying to @jossevel10 :

Well I never had that problem so there was nothing to solve. It's supposed to be a rather loose fit since its stopped from rotating by the upper shell. I'll slice up a test print and try it out after work though, as I've never actually ran it on a Bambu printer.

@user_3303213775

Hello, I have already printed a large and a small 50% version. Unfortunately, I always have a problem with the screw cap, as it is always too tight and thus narrows the slot, so you can no longer push the tube with the teeth into the other tube. Is there perhaps a version with a little more clearance in the thread? If I print something enlarged, the screw cap is also much larger on the outside. Otherwise, it's a great print. Thank you

Show original

@InnovatorBeerJr

Boosted

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

Printed great and works great. I had issues with the top lock also causing the top to become too tight. I ended up sanding the threads on both sides to opening it the tolerance ever so slightly .

@user_1228039762

Boosted

Great Christmas gift to drive one crazy Thank you

Show original

@Alon_Grossman

Thank you very much, I added the word UP so that the wine doesn't fall out when opening and so that they understand which side to close the nut on.

@fptj13

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

The part is large but it is nice and functional thank you

Show original

@equal99

Boosted

Print Profile

0.2mm layer, 2 walls, 15% gyroid infill

Excellent print on my A1, only needed minor adjustments to the end ring

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.