Single Serve Drink Packet Caddy
Print Profile(1)
Description
Boost Me (for free)
If you find the print useful, please consider providing a boost. Boosts help provide me with funding to purchase filament used to test my models before they're published in final format.
This is a handy caddy to store single serve water flavoring packets. There are two plates, one for a 30 packet version, and one for a 54 packet version. Most single serve water flavor packets come in either boxes of 10 or 30 packets, so the small version works well for that. If you want more variety available, then the larger version might be best suited for your needs.
The underside has 26mm x 3mm round recesses that allow the insertion of 25mm (1 inch) diameter self adhesive rubber foot pads. No supports are required, and the pads themselves are optional. You can choose to print the model and not add them, but the pads will help it from sliding around the countertop. I used a really small infill percentage to help keep it light and reduce filament usage. I printed mine using Bambu Lab PLA Wood in Rosewood, but you can use whatever filament you wish.
The smaller version should be able to print on an A1 Mini, but the larger size is the biggest I could make that would fit on the A1 sized plate… which also means it will fit on any of the larger Bambu Lab printers as well.
Here's a link to the type of self adhesive rubber pads that I use, but any 25mm/1" pad that's more than 4mm thick will work perfectly fine:
https://www.amazon.ca/dp/B08C373VBW?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)