Search models, users, collections, and posts
Setup Scope Mounts (1"/11mm Dovetail)
IP Report
Print Profile(1)
0.2mm layer, 6 walls, 25% infill
1.6 h
3 plates
Open in Bambu Studio
Boost
146
354
21
11
577
280
Released
Description
The scope mounts allow you to quickly and easily find the proper height. The mounts fit on an 11 mm dovetail and fit scopes with a tube diameter of 1" (25.4 mm).
Have now added the mounts in 30 mm as well.
The heights correspond to those of the Sportsmatch UK 1" mounts:
| 3d printed model | Sportsmatch category | Height (A) |
| LOW (L) | 1" Low (Dovetail) | 13 mm |
| MEDIUM (M) | 1" Medium(Dovetail) | 19 mm |
| HIGH (H) | 1" High(Dovetail) | 29 mm |
And this for the 30 mm mounts:
| 3d printed model | Sportsmatch category | Height (A) |
| MEDIUM (M) | 30 mm Medium (Dovetail) | 15 mm |
| HIGH (H) | 30 mm High (Dovetail) | 21 mm |
| EXTRAHIGH (X) | 30 mm Extra High(Dovetail) | 27 mm |
Printing
To get good stability, specially in the dovetail clamping area, all parts should be printed with at least 3 perimeters.
BOM
In addition to the printed mounts, you will need the following parts:
- 2 pcs. Cylinder head screw M3 x 12
- 1 pcs. Button head screw M3 x 20
- 3 pcs. Nut M3 (or better Locknut)
- 1 pcs. Washer 3.2
Warning
The holders should only be mounted for testing or to find out the proper mounting height. For shooting, the scope should be firmly mounted with the corresponding metal mounts.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (21)