RD6018P 3D printed enclosure DIY adjustable power supply
Print Profile(1)
Description
Ruide RD6018P + Huawei TMN1APSU as a pre-stage power supply, to DIY an adjustable power supply using a 3D Printed enclosure
2025-12-16 Update:
Fixed the negative wiring on the PCB being too thin
Other parts:
Integrated KCD4 switch socket (AC-4-F16) (optional earless or vertical with ears)
220V 12mm metal push button switch (optional, if not using a switch, a jumper cap is needed to short it)
One XT60E-M male connector and one XT60 female connector (optional)
One pair of XH2.54 terminal blocks (optional)
3x 6.3mm spade terminals
3x 4.8mm spade terminals
4x 2.5-3U type terminals
13AWG silicone wire
If using a metal push button switch, also need 4x 2.2mm spade terminals and 4x 2.54 DuPont female terminals, 20 or 24AWG silicone wire
19x M3*18 nuts (need +2 if using the vertical type socket with ears)
4x M3*10 nuts
2x M2.5*10 nuts (for XT60E-M)
Rubik's Cube server power supply TMN1APSU power board link: https://pan.baidu.com/s/1OfG4P4KiJ0xvfeN22asdrQ?pwd=ktq9 Extraction code: ktq9
【Ruide RD6018P Unboxing, 3D Printed Enclosure DIY Adjustable Power Supply - Bilibili】 https://b23.tv/MtUHzFX
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)