Japanese Inomata Dry Goods Stocker 6.0 Roller Stand Filament Dry Box

★ If you rate with fewer stars (1-4), please always provide the reason why you reduced them Low ratings without improvement points only serve to demotivate the creator ● No bearings or screws required ● Case modification only requires drilling a hole and inserting a PTFE tube ● No supports needed ● Stick glue or a strong build plate is recommended Materials PETG 〇 Recommended PLA Basic △ Usable, but silicone oil is recommended PLA Matte × Not recommended, rollers won't turn smoothly This is a filament dry box using an Inomata Dry Food Stocker 6.0 with desiccant It is sized to make two units on one A1 mini plate It is designed to prevent the desiccant from falling out even when inverted for replacement ◆ v1.5 Update Fixed an issue where narrow filaments would tilt The shaft has been made into a double structure to reduce rotational load (It would be helpful to receive re-evaluation comments from those who printed with PLA Basic or PLA Matte) ■ Individual Printing ■ In Bambu Studio, select this item Then print only the necessary parts using the 'Split to Objects' icon at the top Inomata-K Clear Black Dry Food Stocker 6.0 Made in Japan 1216 https://www.amazon.co.jp/dp/B086LKF81S Temperature and Humidity Monitor https://www.amazon.co.jp/dp/B0DGD5WPL8 Recommended Build Plate CryoGrip™ Pro Glacier https://amzn.asia/d/0ce7EMJo If you don't have the above, it's better to use stick glue Cape 3D Extra Hold (unscented) hairspray is recommended It allows for easy and even adhesion https://www.amazon.co.jp/dp/B07VMRVV2L