Glowing Magic Orb for Scrying, Sorcery, or Decor

This modular color-changing translucent orb looks magical in the dark. Use the twist-on base for wizarding cosplay with two mini LED tea lights, hang it up as a decoration for a wedding, or wrap an LED strip around its stem and plug it in as a night light or Halloween setup. I used clear transparent PLA, but any Bambu transparent PLA will work with the print profile. Use the fade button on the RGB remote for the best lighting! 

Comes with two bases, one with and one without a cord hole and two screw-on caps, one for holding and one for hanging (or you can use it as a ring if you don't want to lose it during cosplay!) 

With PLA, the ball prints very well, but the following settings make it even cleaner: 

• Adaptive + smooth layer height
• Seam position back
• Disabled vertical shell thickness
• Concentric top, bottom, and internal patters
• Overhang speeds at 30 for 25% and 10 for 50%

For the toppers, I recommend adaptive + smooth layer height and default tree supports. Use a prying tool and push away from the center to pop off the supports. 

If you're using other type of filament, please take note of the following. 

Please don't let all my test prints go to waste!!! 

Designer: Anna