Terminator T-800 HueForge

"Print with me if you want to extrude!"

Well, yeah … 

Terminator. Cult. Classic. Terminator 2 is one of the few sequels that excelled in almost every way. And besides Robert Patrick as the T-1000 Arnie as T-800 always will be my all-time favourite.

If you are using the one-click 3MF file on Makerworld (aka the “print profile” in the top right), all appropriate settings have been applied to the print (PLA filaments)! 
Slice it, print it, done.
 

Not a fan of certain settings like the surface pattern? Feel free to change it to something else!

If you want to print a fitting frame you might want to try my universal HueForge 200 x 200 mm frame. It comes in several versions, check it out.
 

If you are not using the one-click printing method, or are not using a Bambu printer, read on:

Print Instructions (manual settings):

1. print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
2. I used matte black as the background for the print, but you can use any variation of a dark or black color
3. I used Bambu Lab PLA Matte Ice Blue

Filament Swaps (4 colors, 5 swaps):

LIGHT VERSION:

1. Start with Black
2. At layer #11 (0.96mm) swap to White
3. At layer #13 (1.12mm) swap to Ice Blue
4. At layer #18 (1.52mm) swap to White
5. At layer #28 (2.32mm) swap to Red

DARK VERSION:

1. Start with Black
2. At layer #11 (0.96mm) swap to Blue Gray
3. At layer #18 (1.44mm) swap to Ice Blue
4. At layer #28 (2.32mm) swap to Red
    

Note: 

I will try another print with darker colors and upload the finished print, Bambu Lab “Blue Grey” is on it's way ...

Filament I've used:

• Black: Extrudr PLA NX2 matt schwarz*
• Red: eSUN PLA+ firetruck red*
• Gray: Bambu Lab PLA Matte “Ice Blue”
• White: Extrudr PLA NX2 matt weiß*

Notes:

• *The used link is a so-called affiliate one. When you buy a product using this link, I will receive a small provision. The price itself does not change. Thanks so much for your support :)
• I am not affiliated with StudioCanal, Skydance Media, James Cameron or any other license holder nor is this print an official release. It's just a fan and hobby project made at home and should not condone theft of copyrighted material and I don't want to get into even the slightest trouble because of that.

Thanks for downloading and printing!