Bed Sheet Anchor System - Free 3D Print Model

Search models, users, collections, and posts

HCAD 3D

Household>Other House Models

IP Report

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

H2D Pro

H2D

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 3 walls, 30% infill

Designer

8 h

1 plate

4.7(7)

Shortened Version PETG 0.2mm layer, 3 walls, 15% infill

Designer

5.4 h

1 plate

5.0(3)

Shortened Version PLA 0.2mm layer, 3 walls, 15% infill

Designer

5.4 h

1 plate

5.0(1)

PLA 0.2mm layer, 3 walls, 30% infill

Designer

8.1 h

1 plate

Click to see more

Open in Bambu Studio

Boost

314

335

187

Released

Description

A compact and efficient solution for loose bed sheets. It consists of two components that clip together to hold sheets together without damaging them. Slide the frame underneath the mattress, and then clip the sheet on with the bolt. The two components do not clip together without a sheet; this is deliberate to ensure that they still fit together when there is a sheet.

Recommended print parameters are:

PETG, minimum 30% Infil and snug supports on the bolts.

The inspiration for this model was a similar design by Levanter, linked below:
https://makerworld.com/en/models/1542248-compact-mattress-sheets-holder#profileId-1618802

Check @Levanter for awesome models, like these.

Boost Me (for free)

Found this model useful? Boost me for free. Any support is greatly appreciated.

Comment & Rating (39)

@tmyguN

Boosted

Printed it out and it works great. But the knobs are still visible. If the part, where the knob ist attached to, would be way shorter, i could hide it behind the bed frame. Would you mind to share the contruction file, or maybe doing a „short version“?

The designer has replied

@HCAD3D

hello, could you please let me know how much shorter you would like it to be and I will make a shorter version. A photo of your application would be great so I can better understand the application of a shorter bracket.

@tmyguN

Boosted

Replying to @HCAD3D :

Thank you!! I want the knob to be behind the wooden frame. Should be a max of 60mm Measured from the bottom edge of the part to the top edge of the hole.

@HCAD3D

Replying to @tmyguN :

Is the second photo what you are after or a really short bracket so that the bolt is near the bed frame.

@DemonSvk

Boosted

Print Profile

Shortened Version PETG 0.2mm layer, 3 walls, 15% infill

@JuergenEbert

Print Profile

0.2mm layer, 3 walls, 30% infill

passt

The profile uploader has replied

@HCAD3D

Glad it worked.

@user_2538781572

Nice efficient and stylish solution

The designer has replied

@HCAD3D

Thanks for the support

@user_479132248

did not work at all for me. printed it out fine but the knobs pop out when the sheet is barely pulled on. they won't fit in the top hole either at all. only in the bottom. I must have something wrong but it's not working at all.

The designer has replied

@HCAD3D

Hello, I am sorry to hear that it is not working for you. There are some solutions to the issue you described. It is important that there is a sufficient amount of sheet either side of the clips and that the sheet isn’t too thin. If the sheet is too thin try doubling it over to add more material. Hopefully this fixes it as this is an uncommon issue.

@gogmoussa

Boosted

Great design! I tried a few others but this one used the least filament and is holding up very well!

The designer has replied

@HCAD3D

Thanks! Glad to hear that it’s working for you.

@DemonSvk

Boosted

goog

@user_2560643961

Print Profile

Shortened Version PLA - STRONGER, Optimized for A1 Mini

Great Idea and execution. The only issue is removal of the supports by where the sheet is attached. It took a lot of effort to remove it.

(Edited)

@itsrafaelrosa

Print Profile

Shortened Version PETG 0.2mm layer, 3 walls, 15% infill

best model to hold the scarf

Show original

@theanttt

Boosted

Simple solution to an everyday problem, prints and works perfectly

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Fitted Sheet Holder

jonas_ldw

20.7 k

8.1 k

Bed sheet clip

FORJ

3.7 k

4 k

bed sheet Holder

Kamil3k

2.4 k

802

Bed Sheet Holder & Pillow Sheet Holders

Jilly

968

483