Ponal Holzleim Ständer Wood Glue Stand

(German version below)

This is an upside-down stand for Ponal wood glue.

You can put the bottle into the big hole when the cap is on,

or in the little hole if you want to put the bottle down without the cap, in between work steps.

The bottom can be screwed off to fill the stand with something heavy, to weigh the stand down.

The model prints with no supports.

This is an upside-down stand for Ponal wood glue.

The bottle can be placed in the large hole when the lid is on the bottle.

Or in the small hole if you want to set the bottle down without the lid, between several gluing steps.

The bottom can be unscrewed to fill the stand with something heavy, to weigh it down.

The model can be printed with no supports.