Raven lowpoly sculpture - Free 3D Print Model

Search models, users, collections, and posts

paururo

Art>Sculptures

IP Report

Print Profile(2)

All

P1S

H2D Pro

H2S

X1 Carbon

P1P

H2D

X1E

A1 mini

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

1.2 h

1 plate

4.6(45)

Fuzzy skin / no layer lines

4.3 h

1 plate

Open in Bambu Studio

Boost

253

904

976

550

Released

Description

Raven lowpoly sculpture

Boost Me (for free)

Comment & Rating (47)

@user_3033330528

Print Profile

0.16mm layer, 2 walls, 15% infill

I've tried printing this twice now, once upsized to the maximum print bed size, and once at default settings, both with Bambu Matte black PLA. The big one failed enough that one of the legs was not connected, and there was some spagetti. The original settings however also have a lot of issues with very poor quality on the undersides of overhangs. And this is with a brand new roll swapped in mid print from a sealed package into a 10% humidity AMS. It's a shame, because it's a really nice model, just something about the supports isn't working for me.

@seviig

Scaled up and printed with 0.28mm layer 👍

@seviig

Print Profile

0.16mm layer, 2 walls, 15% infill

Cool model

@user_3926907145

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

great details

@buckbeak

Print Profile

0.16mm layer, 2 walls, 15% infill

40% Scaled tiny lil crow 🤩

@AlexT67

Print Profile

0.16mm layer, 2 walls, 15% infill

absolutely loving it

@user_3926907145

Boosted

Great model

@Lily_35133

Print Profile

0.16mm layer, 2 walls, 15% infill

My mom is a fan of crows and she loves the printing result of this file

Show original

@c7c8

Print Profile

0.16mm layer, 2 walls, 15% infill

I think it's just a bird model thing because bird legs are flimsy, but I don't recommend putting this on its feet for risk of snapping them off. I printed on its side and it actually came out decently, although the side facing the bed was a little rough from the supports. If I had to do it again and was either okay with purge waste or had an H2D/C, I'd print on its side on a raft + support interfaces made of PLA support.

@user_1969343891

Print Profile

0.16mm layer, 2 walls, 15% infill

The tail sags during printing, supports need to be modified. Otherwise, the model is excellent, well-rendered

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.