CNC Euro Mount Laser & Pen Holder
Print Profile(1)
Description
I designed two holders for my CNC Euro mount here.
One holder is for pens for drawing up to a diameter of 22mm (e.g. Edding 500).
You need two M4 screws with a length of 15-20mm for this
The pen is fixed by the screw in the corner of the holder so that it no longer adjusts itself.
The other holder is for a cross laser for positioning the zero point.
An M4x15-20mm screw is also needed here to assemble the whole thing.
If the Euro mount holder has a threaded hole in the middle of the side that is aligned with the
router center in the X-direction, the laser is X=52mm and Y=15mm away from the router center.
Here you can set a macro and quickly zero tools.
If not, you have to mark the laser and then preferably drive a tip onto it with the router and
then note down the values.
I connected a power bank to the laser to quickly disassemble everything and to avoid having to lay a cable.
I used this laser
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)