Checkers set pieces - Free 3D Print Model

Search models, users, collections, and posts

kklinke

Toys & Games>Board Games

IP Report

Print Profile(3)

All

A1 mini

P1S

H2D

X1E

P1P

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

12 pieces of single color

Designer

2.8 h

1 plate

4.8(23)

Full set (2 sets of 12 pieces on a single plate)

Designer

5.6 h

1 plate

5.0(2)

Flat Print - 1" Checkers with King Icon

2.1 h

1 plate

5.0(5)

Open in Bambu Studio

Boost

104

304

639

397

Released

Description

All the existing checkers I could find online either did not have the traditional stacking ridges or the ridges were too small for my printer to print them successfully. So I designed my own with larger ridges that print easily. It's a standard 38mm diameter and 9mm tall, but you can scale it as needed and the ridges should still work the same.

They print on their edge because I was having issues bridging cleanly on the bottom of the piece when printing it flat. This requires a small brim, but it can be cleaned up with some sanding tools after printing.

Comment & Rating (38)

@RattlerX

Print Profile

12 pieces of single color

Laid thes down and added a monogrammed Initial. used Pla support on the bottom and Shazam…. Excellent design.

The profile uploader has replied

@kklinke

These look awesome! I'm seriously glad that people figured out a clean way to print these lying down, I'm fairly new to 3D printing still and spent a bunch of time trying to do it before giving up on it and just printing them standing. Please feel free to publish a new profile lying down for others!

@RattlerX

Replying to @kklinke :

Im not sure how to do that but I will figure it out and get it published. Thank yo

(Edited)

@ebonyandbirch

Boosted

Best Design on Makerworld! A classic piece with stackable interlocking features. I modified this design a bit to print flat, my OCD did not want a textured flat spot, nor did i want to post process these. I painted supports just in the center pocket. I also made this pocket deeper to accomodate a press-fit King icon to cover the supported surface for a clean finished look. The small pockets in-between the stacking ribs was small enough for the printer to bridge the gap. The original design was scaled down so the final piece was about 1" in diameter. I can share my print profile if you don't mind. Thanks!

@frijoli

Print Profile

12 pieces of single color

@ebonyandbirch

Boosted

Print Profile

12 pieces of single color

printed 1 of 12 to see what post processing would entail. I did not liked the flat spot from printing in this orientation. I uploaded a profile for printing flat. love how these stack tho!

The profile uploader has replied

@kklinke

It's funny, I spent a bunch of time trying to get a flat profile to work initially but gave up because the supports were such a pain to remove. I agree with you that the flat spot from printing upright is annoying though, so if you found some print settings that work flat and removes it that's awesome!