Grateful Dead Pop Art Hueforge

Hueforge Grateful Dead Pop Art Print,

I used Bambu Basic Black, Blue, Magenta, Yellow and White. Resulting in a high quality high texture print in the 2.5mm height range. File is set at 200mm x 200mm but can be changed, do not change the height (Z axis). Colors can be changed to suit your needs.

This is a 5 color print.

Load your Ams with Black, Blue, Magenta and Yellow. Program the White to be Black, Blue or Magenta and note which it is. There is a pause at the second to the last layer of Yellow. At or before the pause switch White into the slot of the color you chose for it and resume.

Check out my bio for info on commercial rights. 

The files cannot be sold, shared or transferred in any way ever.

Project: grtful dead blk blu mag yel wht.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 1.12mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #cd007b PLA BambuLab Basic Magenta  Transmission Distance: 3
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (1.2mm) swap to Cyan
    At layer #16 (1.36mm) swap to Magenta
    At layer #20 (1.68mm) swap to Yellow
    At layer #24 (2mm) swap to Jade White for the rest.