Search models, users, collections, and posts
Norden 901 KTM 790 890 Adventure Air Box Drain Plug
IP Report
Print Profile(2)
0.2mm layer, 5 walls, 100% infill TPU
Designer
32 min
1 plate
0.2mm layer, 5 walls, 100% infill ASA
Designer
15 min
1 plate
Open in Bambu Studio
Boost
11
28
2
0
44
11
Released
Description
Airbox drain plug for the Norden 901 and KTM 790/890 Adventure. Printed in Overture TPU 95A with no supports.
The inner diameter looks much smaller than the original drain plug but it's because I made an inner lip to make sure the foam would stay in.
I made a TPU and a ASA (ApolloX) version as I was a litte concerned with TPU and heat. I measured the TPU part at 70c while the bike was hot. The ASA part has the second rib removed as it's not flexible but it's a tight fit so should not come loose.
I made another version with FormFutura Python Flex 98A TPU as it's meant to be heat resistant to 138c. Should be no issue with the exhaust side now. Also added another profile with a 3mm longer body.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (2)