Turtle Echo Dot 4th and 5th Gen holder - Free 3D Print Model

Search models, users, collections, and posts

StrabonZ

Household>Decor

IP Report

Print Profile(1)

All

H2D

H2C

X2D

X1 Carbon

A1 mini

P1S

H2S

P1P

X1E

H2D Pro

P2S

0.2mm layer, 4 walls, 15% infill

Designer

4.9 h

2 plates

4.9(35)

Open in Bambu Studio

Boost

363

792

638

298

Released

Description

Content has been automatically translated.

Show original

This cheerful turtle is not just an eye-catcher, but also the perfect holder for your Amazon Echo Dot (5th Generation).
The speaker is simply placed into the turtle's back and sits securely there – making your Echo look like a cute turtle shell.
Perfect as a gift idea or to spruce up your own smart home setup

Features:

Suitable for Amazon Echo Dot 4th/5th Generation
Figure with a friendly face and detailed shell
Printed in two-color, silky glossy filament for a special look (e.g., Silk PLA Blue/Green)
Stable stand, no additional attachment needed

For the print, I set a variable layer height in the upper area to make the head look better

Note:
The model is specifically adapted for the Echo Dot 5. For other generations, the fit might not be perfect

Boost Me (for free)

Did you like it? Then give me a small boost – that would be like a high-five for my work

Boost Me (for free)

"Did you like it? Then give me a small boost – that would be like a high-five for my work!"

Comment & Rating (54)

@3lacksquid39

Boosted

Great result. I love the design, there was a problem during printing, the delete from the mouth did not hold. As a result, I sanded it to make it a tooth and it looks even better than the original 🤣. Thank you

The designer has replied

Show original

@StrabonZ

I agree, this Looks awesome !!

@user_3697531810

Hello, I wanted to print the turtle too. After importing the file into the slicer, there was no notch on the shell for the echo. Where is my mistake? I have the Flashforge AD5X. Thank you and best regards Ivonne

The designer has replied

Show original

@StrabonZ

Hello Yvonne, you have loaded the STL here, which includes the turtle as a whole. Again, the 3mf file was edited with the negative of the Echo dot, where the cutout can then be found

Show original

@user_3697531810

Replying to @StrabonZ :

Thank you very, very much for the answer. It helped me a lot and I was able to start the print. I really downloaded the STL file. Now I know why other files also printed without opening. Unfortunately, I didn't get any help from anyone until now from you. I am new and am really happy now that I know where my mistake was. Schildi is currently printing :-) . If I could, I would give 10 stars here

Show original

@StrabonZ

Replying to @user_3697531810 :

no problem have fun with the print :) make sure that you always use the 3mf files these files contain everything that was set by the designer the number of walls the infill which supports sometimes also separately drawn supports this way you are on the safe side. An STL file is always just the raw data model and especially when you are not yet so familiar with it errors might occur or you will have unnecessarily long print times :)

Show original

@user_1660293615

Print Profile

0.2mm layer, 4 walls, 15% infill

Printed with Sunlu Silk PLA, nice print :)

Show original

@user_985439358

Print Profile

0.2mm layer, 4 walls, 15% infill

It is truly beautiful ❤️ and a great model I had a lot of trouble removing the supports on the left between the leg and the armor You can see that in the picture But I attribute that to my inexperience with making various adjustments afterwards

Show original

@user_1014871812

A fantastic print👌....so adorable...it puts a smile on your face😃...thanks for sharing👍

Show original

@Blackshark

Print Profile

0.2mm layer, 4 walls, 15% infill

Looks fantastic and printed well I just put the PLA Silk in the dryer first

Show original

@user_2876432592

I would have loved to try this one. but it didn't slice

The designer has replied

@StrabonZ

Why? Where is the problem? I sliced it normally with Bambu Studio

Show original

@user_2876432592

Replying to @StrabonZ :

I tried to print it with the FlashForge Adventurer 5M. But for one, it displays the design around the head differently than shown here and when slicing it does not get past 5% despite a long wait

Show original

@StrabonZ

Replying to @user_2876432592 :

That is very odd can you also use other slicers for that

Show original

@user_67722192

Print Profile

0.2mm layer, 4 walls, 15% infill

PERFECT PRINT !!!! CUTE!!!!! Thank you very much

The profile uploader has replied

@StrabonZ

thank you :)

@alessandro95

Really beautiful! I recently made a snail-shaped Alexa holder. These Echo dot holders are really beautiful ❤️

The designer has replied

@StrabonZ

Thats a Great idea! :)

@user_1764017596

Print Profile

0.2mm layer, 4 walls, 15% infill

Great print 👍

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.