Red Crown - Cult of the Lamb - Free 3D Print Model

Search models, users, collections, and posts

Shinpi

Props & Cosplays>Masks & Helmets

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill, Back Seam Position, Default Tree Support

Designer

27.6 h

5 plates

4.8(30)

Open in Bambu Studio

Boost

315

793

767

448

Released

Description

This my first cosplay piece, the "Red Crown" from the Cult of the Lamb. There are a few different models for different methods of wearing the crown, along with a 3mf file for full color on the Bambu X1C.

Size: 75mm x 75mm x 95mm (2.95in x 2.95in x 3.75in)

I also sell the fully printed crown on Etsy: https://www.etsy.com/listing/1342689532/red-crown-cult-of-the-lamb

Comment & Rating (38)

@Guide

Boosted

thanks :D

@SkinnyKirby

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill, Back Seam Position, Default Tree Support

Thank you! Turned out Great

@HenneDev

Print Profile

0.2mm layer, 3 walls, 15% infill, Back Seam Position, Default Tree Support

when using dynamic adaptation the color varied a bit but that was my fault perfect print thank you very much

Show original

@Ombiax

Print Profile

0.2mm layer, 3 walls, 15% infill, Back Seam Position, Default Tree Support

The presets are interesting, I am still impressed and disappointed at the same time. The bridges at the sides worked perfectly with the 1mm Support Offset, but the upper part failed on a lot of layers with the support up there. (Maybe I should leave out the support for the inner upper part.)

@Truck

Print Profile

0.2mm layer, 3 walls, 15% infill, Back Seam Position, Default Tree Support

Good model!

@Ink81

Boosted

print on a neptune 3 pro and painted myself. the model is awesome we now need the other crown 👑

@user_701212642

Print Profile

0.2mm layer, 3 walls, 15% infill, Back Seam Position, Default Tree Support

@Vdiwheosnev

Before i print this, I was wondering how it fits on the head? I would like to know before I start.

@r0gu3bull3t

I’m wondering the same thing

@user_53056245

Do you have way that can pay you if I sell this

@Addycorn25

@Shinpi do you?

@stoic_af

Print Profile

0.2mm layer, 3 walls, 15% infill, Back Seam Position, Default Tree Support

The product itself is great. But the images are really difficult to see the differences between each plate. I had to open it in 3d viewer and change the color to white to find the plate design I needed.