TS101 Soldering Station

This is a soldering kit I made for my TS101 soldering iron and accessories. 

It has the main iron and tip, a heat insert tip and 7 different heat insert sized tips, a container of brass wool/flux, a clip-in stand made from 2 bearings press fit into the holders, a bullet plug to XT60 cable which I always use with a Milwaukee battery for portability, a desoldering pump, a pair of tweezers, and a soldering spool. 

The soldering spool was made by EnteSuesssauer15, shoutout to you, works great.

https://makerworld.com/en/models/1322071-twistlock-solder-spool#profileId-1358426

There are 2 main inserts which get pushed into the box.

There's a few empty compartments for putting small things while you solder if needed or for small insert possibilities later.

The bearings used are ID: 8mm x OD: 22mm x W: 7mm

There's no glue, everything is friction fit. For more info on the box specs see the Rugged Box Post I made: https://makerworld.com/en/models/1701346-rugged-pelican-box#profileId-1804232