Heart of Texas

WELCOME

Welcome to another model found Exclusively here on Maker World.  I'm not a professional full-time print farm or print designer.  I have a day job and do this for the love of doing it.  Please LIKE, COLLECT, and FOLLOW to see more of my work as it becomes available. 

MODEL INFORMATION

This model evokes the love and pride we have in our state.  The boot represents the old cowboy traditions still celebrated today in its many working farms and ranches. The Texas flag, also known as the Lone Star Flag, symbolizes Texas's history as an independent republic and its spirit of independence. The red, white, and blue colors represent bravery, purity, and loyalty, respectively. The single white star, which gives the flag its nickname, represents unity and Texas's status as a former independent nation.

Assembly Instructions:

All parts are printable.

1. Remove all brims and supports.
2. Place Texas field in Texas Frame.  It is a press fit.
3. Check for loose fit of Spindle into the bottom of the Texas assembly.  Remove Spindle.
4. Hold Heart in cut out.
5. Slide Spindle in near Brownsville and press up North thru San Antonio and into Killeen.  Spindle should be a loose fit North and South.
6. Place assembled Texas in the front of the boot at a slight downward angle.  Only El Paso will extend out of the back of the boot.
7. Gently rotate Texas assembly clockwise into to its vertical position with Brownsville going into the boot toe.
8. The Spindle should drop into the boot toe recess to secure the Texas to the boot.  If not, spin the heart a couple of times and it should drop loose.  Bam….Texas Pride.

Check Out My Other Models and Collections HERE!