Graffiti Kaneki Ken Hueforge
Print Profile(2)
Description
Boost Me (for free)
With the changes to points, boosts are one of the best ways to support creators! Any support is welcome!
Want to sell my prints? Commercial License now available here: https://patreon.com/3ReePrinting
Membership
Commercial License also available here!
Check out the rest of my Hero/Villain series here: https://makerworld.com/@3ReePrinting/collections/3340968
Commission for Kaneki Ken from Tokyo Ghoul!
You can substitute the Glow Blue with Basic Cyan for similar results.
This print is the maximum build plate size for an A1 Mini, but it should work on any printer.
If you resize the model make sure you do NOT scale the Z axis or the print colors will not be in the same position
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x170mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#7ac0e9 PLA Bambulabs Glow Blue Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Red
At layer #13 (1.12mm) swap to Jade White
At layer #14 (1.2mm) swap to Black
At layer #17 (1.44mm) swap to Blue
At layer #21 (1.76mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)