Bambu AMS Filament tag stand remix Remixed by ScottE

Remixed by

ScottE

3D Printer>3D Printer Accessories

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

Tag "Blank", Material: PLA, 0.16mm layer, 2 walls, 15% infill

17 min

1 plate

5.0(3)

AMS-Stand, PLA, 0.2mm layer, 2 walls, 15% infill

1.6 h

1 plate

3.8(6)

Open in Bambu Studio

Boost

138

Released

Description

This handy filament tag stand for Bambu printers clips right on the front of the AMS, no other fastening required, and the tags slip in and out.

This is a minor remix of MarkusMatreku_390422 Bambu Labs - AMS - Belegung with the designs exported as STL files, as importing the 3MF files will override all printer and filament settings. I also included tags for PLA, ABS, and PETG (using Bambu Slicer text function with default font and size, .5 thickness).

Be aware that the slicer is correct about unsupported overhang without some support material - I didn't see what the issue was until after I started printing it, and it's the bottom of the tag holes (as the holder sits installed). It still works, but there are some strings in the recess that need to be cleared out.

Also see my related Bambu Labs AMS Filament Tag Holder

ams

bambu

Comment & Rating (22)

@RobDrivesCars

STLs are broken (0-byte files)

The designer has replied

@ScottE

All fixed! Sorry about that - I was manually importing all my models from Printables - which is a manual process since Prusa is actively blocking MakerWorld automatic imports - and somehow I managed to mess this one up.

@RyFiGuy

Print Profile

Tag "Blank", Material: PLA, 0.16mm layer, 2 walls, 15% infill

Works perfectly. Have downloaded all the various tags I need for my filaments and rotate in & out as things move around. Kept the base simple because, well, simple was good enough for me.

@SuZ3Dx

The print profile is no longer public

@jkhamou

Print Profile

AMS-Stand, PLA, 0.2mm layer, 2 walls, 15% infill

(Edited)

@LuckyDuke_

Print Profile

AMS-Stand, PLA, 0.2mm layer, 2 walls, 15% infill

Because of the "Bambulab" text, it's harder to use with some filaments. 1,2,3,4 is enough, this part is not manufactured by Bambulab, why adding this text on it ? I'll try later, but I gave up for now.

@ScottE

The question about why the Bambulab text is on the model is a good question - but it's one for the original author of the design, not me. :-)