Holder for Tuja 4-gang Wall Button ESW-0ZAA-EU

Simple Wall Holder for the Tuja 4-gang Wall Button ESW-0ZAA-EU

I have designed a simple, quick-to-print holder for a Tuja 4-gang Wall Button ESW-0ZAA-EU.

It is fixed to the Wall with two countersunk screws.

In the area of the screw holes, the model can be reinforced during slicing (thicker Wall or solid material) if desired / required. I printed the area as solid material, then the model is not as sensitive if you tighten the screw too much.

________________________________________________________________________________________________________________

Simple wall bracket for the Tuja 4-gang wall push-button ESW-0ZAA-EU

I have designed a simple, quick-to-print holder for a Tuja 4-gang wall push-button ESW-0ZAA-EU.

It is fixed to the wall with two countersunk screws.

In the area of the screw holes, the model can be reinforced during slicing (thicker wall or solid material) if this is desired / required. I have printed the area as solid material, then the model is not so sensitive if you tighten the screw too much.