Poop Chute Large Magnetic for Bambu Lab X1 by V3 Precision

V3 Precision

3D Printer>3D Printer Accessories

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 15% infill

Designer

4.5 h

1 plate

4.6(236)

FIXED height; Faster print: <3.0h, Adaptive infill etc.

2.9 h

1 plate

4.9(116)

Nice finish yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill

3.9 h

1 plate

4.8(27)

Boost

668

1179

554

5 k

3 k

Released

Description

This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a larger sized container than my other design.

The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick). The mounting hole for the magnets are cut oversized (0.51 diameter) for an easy fit. Might need to super glue the magnets in place.

The cutaway o n the size serves two functions. It gives you a recessed handle to grip the poop chute when taking it off. The angled top of the cutaway helps direct the waste filament across the chute. Helps to keep the filament from bunching up directly beneath.

Filament - I used PLA+ or PLA Carbon Fiber

Support - Yes; Hybrid, Auto

Layer - 0.2mm

Infill - 15%

3mf file using Bambu Lab Studio (slicer)

UPDATE:

The design was updated to accommodate the feet added to the X1, X1C, P1P, and P1S.

The new design is poop_shoot_L_magnetic_V2

You can find a finished Poop Chute with the magnets on our website www.v3precision.com.

Comment & Rating (554)

@warzonna

Boosted

Print Profile

FIXED height; Faster print: <3.0h, Adaptive infill etc.

Perfect print, perfect fit.

The designer has replied

@BRAMZ_

Boosted

Thanks for the upload and review!

@gopnik

Print Profile

FIXED height; Faster print: <3.0h, Adaptive infill etc.

Nice and sleek

The designer has replied

@BRAMZ_

Boosted

Thanks for taking the time to upload a picture and post a review!

@NicerWixxer

Print Profile

FIXED height; Faster print: <3.0h, Adaptive infill etc.

hat Mega gut funktioniert hält auch ohne Magneten super

@NoogaJoe

I like the design but with the standard feet, it's a little too tall and as others have said, the waste filament gets caught and doesn't make it into the bin. I'd recommend lowering and adding a chamfer to the contact edge of the shoot. Otherwise, great job!

@Ktkatz

The print profile is no longer public

Printed super fast and fit like a charm.

(Edited)

The designer has replied

@AneoPsy

Thanks for reviewing, I appreciate the feedback.

@Navibp3d

The print profile is no longer public

A 10 for the design and the designer, a very elegant model!!!!! Actually it's 5 stars but it won't let me publish, but if I mark 3 it lets me send the rating....