Camp Snap Lens Cap - Free 3D Print Model

Search models, users, collections, and posts

BlackHawk

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

A1 mini

P1S

X1 Carbon

P1P

H2D Pro

H2D

X1E

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 15% infill

Designer

30 min

1 plate

4.9(8)

0.08mm layer, 2 walls, 15% infill

1.6 h

1 plate

Open in Bambu Studio

Boost

140

105

Released

Description

Camp Snap Lens Cap – Protect Your Lens, Anywhere You Go

This lens cap was made just for the Camp Snap camera, giving your lens a secure fit without being so tight that it’s hard to remove.

It keeps dust, dirt, and scratches at bay, so your camera is always ready when adventure calls.

The textured sides make it easy to grip, even with cold or wet hands, and the rounded edges mean no uncomfortable pokes or snags.

Just don’t forget to take it off before your next shot—you’ll thank yourself later. 😉

Boost Me (for free)

If you enjoy this design, please consider boosting it—your support helps me continue creating useful and fun accessories like this!

Comment & Rating (14)

@cjperisho

Boosted

Pinned by Designer

Print Profile

0.08mm layer, 2 walls, 15% infill

Great print! Tweaked the file a bit to upsize it for my Camp Snap Pro, flipped the print orientation, and changed the top layer to Hilbert Curve for better aesthetics. I've printed a couple now with awesome results.

@eandi

Boosted

Can you share the profile for the camp snap pro?

@cjperisho

Boosted

Replying to @eandi :

I did! it’s the same one as the photos in my post here. Happy printing!

(Edited)

@cjperisho

Boosted

I used your model to make a version for the bigger Camp Snap Pro. Happy to send it to you to post if you like, it won't let me post it as a remix.

The designer has replied

@BlackHawk

Hi, nice work! You could add it as an extra print profile here

@cjperisho

Boosted

Replying to @BlackHawk :

I did. It’s the one with the same photos as my comment here.

@cjperisho

Boosted

Much nicer looking design than all the other options out there, especially if you print it open side down and change the top layer pattern to Hilbert Curve.

@Azcrawfish

Print Profile

0.08mm layer, 2 walls, 15% infill

fits great! I love it!

@user_4008427555

Print Profile

0.08mm layer, 2 walls, 15% infill

Fits perfectly, thanks!

@user_3485148280

Print Profile

0.08mm layer, 2 walls, 15% infill

Really awesome and much needed. Fits like a dream and looks good too!

(Edited)

@InMyPlantEra

Print Profile

0.08mm layer, 2 walls, 15% infill

@aaronlittle77

Print Profile

0.08mm layer, 2 walls, 15% infill

@jrwasu

Print Profile

0.08mm layer, 2 walls, 15% infill

@matteocef

Print Profile

0.08mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.