Dragonball Lamp

Dragonball Lamp – Stylish & Easy to 3D Print 

Here you'll find a stylish lamp that you can easily print yourself – perfect for a cozy atmosphere at home.
Two variants are available to you:

🧷 Variant 1: Glued

🔩 Variant 2: Screwed

______________________________________

🛠️ Recommended Print Settings:

🔲 Main Part

• Optimal Layer Height: 0.16 mm for fine details
• Time-saving Alternative: up to max. 0.20 mm

🪵 Back Panel with Diffuser

• Recommended: 0.20 mm
• Maximum: 0.24 mm
• This ensures a particularly soft, pleasant light – ideal for a cozy atmosphere.

💡 Note on the Back Panel:

• The back panel is intentionally a bit looser because I glue it before shipping.
  If you want a tighter fit, you can enlarge the back panel in the slicer by 0.5% to 1% – just try what works best for you!

🔧 Details for the Glued Version

• LED Holder: This should be fixed with some plastic adhesive.
• LED Strips: Simply insert – due to the adhesive surface on the back, they usually hold well.
  The printed support prevents the strips from detaching when heated (e.g., by COB LEDs).

• Recommended LED Strip Length: at least 74 cm

   

🔩 Details for the Screwed Version 🔩🪛

• Required Accessories:
  • 5x M3x6 Heat-set Threaded Inserts
  • 5x M3x12 Screws
• 🔧 Tip: Please do not overtighten the screws to avoid damage.

I wish you much joy with printing and crafting! If you have questions or want to share your result, I look forward to your feedback! 
Happy Printing!