1:64 Scale Multi-Story Parking Garage - V2.0 (Multiple Connection Options)

💁🏻If you encounter printing problems, please don't rush to rate~🙏🏻

Leave a comment and upload photos 🫶🏻I will help you solve it immediately!

⭐️ It is recommended to print the new buckle version in this print profile ⭐️

2.0 Version Update Log:

2026-03-28:

• Updated wall-mounting accessories (After assembling the parking lot, fix it to a wall or cabinet, feel free to use your creativity)

2026-03-15:

• New buckle version / Compatible with PETG material (Tested with Bambu Lab PETG HF)
• The front ends are connected horizontally, making it less prone to deformation during long-term use and providing a more stable structure
• Due to elephant foot issues when printing the female buckle, which caused difficulty in installation, the male part was modified to have a chamfer for easier insertion

2025-9-23:

• User feedback indicates that k's PLA Matte is relatively brittle and breaks easily during installation, so it is recommended to print the super glue version

2025-9-17:

• Due to user feedback requesting a version without buckles that relies solely on super glue, the 2.0 super glue version print profile has been released (no other differences except for the buckle design changes)

2.0 Version optimizations compared to 1.0 Version (click to view):

• Added side-by-side connection methods for rows and columns (can be freely combined and connected)
• Added an additional fixing structure on the back (for more stability when stacked)
• Raised the edges on 3 sides to form reinforcing ribs (less prone to deformation)

Installation animation (may require loading time)

The parking lot is compatible with most 1:64 scale small cars (refer to the dimension diagram for details)

Regardless of Q-cars, SUVs... even MorganSuper3 three-wheelers can be parked

Model tested materials: Bambu Lab PLA Basic and PLA Matte

• Install after printing and cooling, otherwise the structure may break easily
• When installing, insert one end first, then gently press the other end
• If concerned about looseness or brittle material, you can print the super glue version

⚠️Note: Do not force it forcefully, as low material layer adhesion can easily lead to breakage

"1:64 Multi-story Parking Lot" Compatible with mystery box figure storage box

The storage box can be purchased separately; different vendors may have slight size differences, as long as the internal dimensions generally match, refer to the dimension diagram for details

Brand new 3.0 version 1:64 parking lot (click to view)

⭐️Added sides / Longer / More combinations⭐️

If you encounter any problems during printing, feel free to leave a comment or send me a private message.
I will assist you in identifying the problem and providing a solution as soon as possible.🙏🏻

For faster processing, you can attach:

• Photos of the problem📷✨
• Filament brand and model🧵
• Printing parameters (layer height/temperature/speed, etc.)🔧

Let's work together to ensure you can complete your prints smoothly and with high quality.😊

💡Click to view《Print Quality Solutions》 to troubleshoot problems 💡

Ratings are very important to creators   You can read《Rating Guidelines》 then rate