Persona 5 Yusuke Hueforge

Hello hello,

Continuing with the Persona 5 hueforge train, we have Yusuke's all out attack. This one took a while to edit, even with 0.2 nozzle I doubt the 3d printer can capture all the dot present in the art so I had to remove a majority of them…. Also have to change text to it 

Notes:

• Please only scale the X and Y dimension, do not change the Z dimension
• This file may take a while to slice due to the amount of detail, please be patient. You can simplify the model but at most at high setting, medium and lower you will see sharp edges and dents on the print.
• You can stop the print at layer 23 if you don't mind the yusuke's glove to be white

Filaments Used:
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Basic Blue Transmission Distance: 4
    PLA BambuLab Black Transmission Distance: 0.3
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
 

Swap Instructions:
    Start with Red
    At layer #7 (0.64mm) swap to Blue
    At layer #12 (1.04mm) swap to Black
    At layer #16 (1.36mm) swap to Jade White
    At layer #23 (1.92mm) swap to Ice Blue for the rest.

Catch ya next time, byeeeeeee