Beetlejuice business card holder
Print Profile(2)
Description
I had a friend request me to design him a Beetlejuice themed business card holder, and this is what we came up with.
I am uploading a 4 Plate print profile, as well as an H2D profile.
The 4 plate profile includes the front “Beetlejuice” Plaque. Its 3 color and requires a .2 Nozzle to print the details at a layer height of .10mm. You can do it finer, but .10 will get you the same results as shown on mine. From there you can print the rest of the stand with a .4 nozzle at .20mm layer height.
I have also included a box that has glue on white sections, as the 2 color black and white section takes a long time to print unless you have an H2D for fast color swaps. Just print out the black part, and then the white sections and glue them on before applying the front plaque. There are several very small pieces that will be missing from the front, however those are mainly covered up once the plaque is adhered and I determined they would be too much of a problem for most people to try to print.
The H2D profile, again you must use a .2 nozzle on the plaque, but then can switch to a .4 with either 20mm or less layer height, or even .6 with 18mm layer height works even faster.
Boost Me (for free)
Please consider boosting this model if you enjoyed it. Boosting helps offset the cost of materials, as well as time involved designing to upload to makerworld.
This model is uploaded under the stand digitial license, which means it is for your personal printing only. I do not offer commercial license.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)