Modern Candlestick - Candleholder - Free 3D Print Model

Search models, users, collections, and posts

3D2K

Household>Decor

IP Report

Print Profile(1)

All

A1 mini

P1S

X1 Carbon

P1P

H2D Pro

H2D

X1E

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.7 h

1 plate

4.8(38)

Open in Bambu Studio

Boost

597

1819

1.3 k

724

Released

Description

Content has been automatically translated.

Show original

A modern taper candle holder with a stepped, ribbed base and a clean cylindrical stem. The layered rings catch the light beautifully, while the wide footprint keeps the piece stable. Designed for easy 3D printing (base-down, no supports) and simple post-finishing. Perfect as a single accent or grouped in sets on a dining table or shelf.

Detailed (listing / portfolio)

This 3D-printable taper candle holder combines a minimal silhouette with subtle detailing. A broad circular base is sculpted into concentric steps that create a soft ribbing effect; above it, a smooth cylindrical stem forms a snug candle well. The geometry balances visual lightness with a low center of gravity, so it sits securely on the table. Printed base-down, the model requires no supports and finishes cleanly in PLA, PETG, or resin. Leave it matte for a contemporary look, or sand and prime for metallic paint. Style it as a single statement piece or group several at staggered heights for a refined centerpiece.

Key features

Stepped, ribbed base that plays nicely with light and shadow
Stable footprint and clean cylindrical candle cup
Optimized for printing flat on the base, no supports
Works with PLA/PETG/resin; easy to paint

Print & finishing notes

Layer height ~0.2 mm, 3–4 perimeters, 15–25 % infill
Add a brim if your bed tends to warp; stick-on felt pads protect the surface
For real candles: never leave unattended. Consider heat-resistant filament, a metal sleeve/liner, or use LED candles if preferred.

Measurements

Diameter: 12cm

Bottom Height: 1cm
Height with Stick: 4cm

If you would like to support me once, you are welcome to buy me a coffee ❤️:
https://buymeacoffee.com/3d2k

⛔️ The sale of physical prints is only permitted with a commercial license.

Membership

Do you want a commercial license for my models? No problem :) You can now acquire one from me through a membership <3

Join

candle

candlestick

modern

Comment & Rating (47)

@derdeichmann

Print Profile

0.2mm layer, 2 walls, 15% infill

Very good model 🤩🥳 Printed. Tested. Liked. Cheers derdeichmann

The profile uploader has replied

@3D2K

Thank you for your review and photos 😁

(Edited)

Show original

@doganlar

Really beautiful candlestick

Show original

@prudison

Print Profile

0.2mm layer, 2 walls, 15% infill

good quality

@mikaroma

I really liked it For those from Brazil the candle slot's width is wider than the common number 5 candle but it does not hinder use just melt a little of the candle's bottom and fix it to the holder

Show original

@SOMIGIFTSHOP

Print Profile

0.2mm layer, 2 walls, 15% infill

@Kernschmelzer

Print Profile

0.2mm layer, 2 walls, 15% infill

Well done, girlfriend likes it... :-)

The profile uploader has replied

Show original

@3D2K

I am happy to hear that :) Thank you very much for the review ;)

Show original

@user_1388148314

Hi, Please add the candle's inner diameter to the description if applicable, that information is missing

The designer has replied

Show original

@3D2K

Hi :) Thank you very much for the feedback, I will add it to the description :)

Show original

@HerraAntti

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed one from Bambu Basic PLA black. No issues with printing. Although not fan on the smooth top of the lines of the bottom which is really clear with the filament I selected.

The profile uploader has replied

@3D2K

Thanks for your feedback. The best result I've achieved so far was with matte PLA filament :) Unfortunately, I gave the print away, otherwise I would have taken a picture and attached it for you

Show original

@SlumpetGoku

Print Profile

0.2mm layer, 2 walls, 15% infill

Simplicity and efficiency

Show original

@user_2066916038

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed in PLA Wood and it turned out very well. The wife was pleased

Show original

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.