Tomeszkomesz

cover

tempImageD6KgeO.jpg

tempImagergHH05.jpg

tempImageu64WNf.jpg

tempImage4NnOsy.jpg

tempImageoTZnyY.jpg

plate_1.png

2025-08-12_70a8c87a7a5068.jpg

tempImageWtrKxs.jpg

<ul><li>Low print speed and enclosure needed</li><li>Nice surface finish</li><li>Easy to remove the supports when the print is cooled down</li><li>easy to replace the old broken one and it&#39;s ready to go</li></ul>

0.18mm layer, 2 walls, 15% infill

Better strength by the tilted layerlines

tempImage6EL178.jpg

IMG_7081.png

The previous version had some strength issues at the pins. I figured out, that&#39;s because of the layer lines adhesion, so I printed the same design tilted by 45 degree and voila. We got a better part, more durable and not too much effort needed. I still recommend to print it from Asa for the heat resistance and it needs to be printed in enclosure. That&#39;s why I would not recommend to print this part on an A1 P1P or A1 mini printers.  Enjoy! Have a nice day!&nbsp;

Better Strength (update)

PETG version

PETG version.png

I still recommend using ASA for this part, but I do want to get this available for A1 and A1 mini users.It&#39;s a simple PETG print, with the same settings as the ASA one, except material specific ones.Enjoy it!

PETG version specially for A1 and A1 mini users

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>I don&#39;t want us to make waste. We have to solve general problems and I believe we could. Thanks for choosing my design and I hope you won&#39;t regret it. Have a nice day!</boostcontent></boostme>

SilverCrest Sandwich Maker lock

ASIA

Print Profile(3)

Description

Comment & Rating (4)

License

Related Models