Casper The Ghost String Lamp

This 3D printed model of Casper the Friendly Ghost captures the beloved character in a floating LED lit display. Designed to be suspended by fine strings, Casper appears as if he’s hovering mid-air. 

The lightweight print and smooth, friendly contours make it ideal for displaying it windows, rooms, or as part of a Halloween or themed decoration. Perfect for fans of the classic character, this piece combines nostalgia with the charm of modern 3D printing.

SPECIAL NOTE!!!!!
 

Try not to use the Super Tack plate, taking the print off may damage the strings. Most models with strings only use a single 0.24 layer high string, I use two. That way, if one fails, the other usually does not. There are other variations on the way, such as AMS painted, strings different color and support for the lamp and waterproof pucks.  But, you also need to have proper adhesion, clean your plate and watch the print so you get the best results possible.

To light it you will need the standard 3AAA RGBW pucks from bambu lab, two in total.

Relatively simple, assemble the two halves using an assembly jig in the profile, it is basically two rings that will fit exactly to the two halves, just make sure you put a paper down so the glue doesn't leak and ruin your table (ask me how I know). There are nubs in the provided bases and it will keep it in place for a desktop stand, but carrying it around without gluing it, is not advised… if you are happy with it and do not wish to reuse the base for my other models, go ahead and glue it.


Also, DO NOT change layer size because then the mid air strings may fail.  Any issues, let me know.

Other models you may want to check out :)

 

NO Ams switch Pro Controller Holder